Setup Guide
This page provides the recommended base setup for our models.
These settings are intended as a starting point and have been tested to ensure stable and reliable flight performance.
Aileron Settings & CG (All Models)
CG 70-72mm
Start -1.5°
Take off -1.5°
Speed -1°
Cruise +2°
Thermal +3.5°
Thermal 2 +5°
Aileron differential
Normal -10° ÷ +9°
Thermal -8° ÷ +12°
Thermal 2 -7° ÷ +14°
Shaman Evo – additional settings
Tails travel:
rudder +/- 15mm
| up | down | |
| elevator | -8⁰ | 15⁰ |
| mixers: | ||
| rudder / elevator | -6⁰ | 14⁰ |
| aileron / elevator: | ||
| normal | -2⁰ | 4⁰ |
| thermic | -4⁰ | 11⁰ |
| thermic 2 | -6⁰ | 14⁰ |
The elevator requires a small shim under the rear mounting bolt to achieve the correct incidence.
- Thickness: 0.4mm
- Equivalent to: 5 included stickers.
Place the stickers under the real bolt as shown in the image.
Setup Tools (Gauge Usage)
Our setup gauges are designed to ensure accurate and repeatable control surface adjustments.
Wing Gauge (Ailerons / Flaps)
Used to set the correct deflection angles of the wing control surfaces.
- Position the gauge on the wing
- Align with the control surface
- Adjust until the desired angle is reached
Elevator Gauge – Shaman Evo
The Shaman Evo also uses a dedicated gauge for setting the elevator.
- Position the gauge on the elevator
- Set the elevator to the required neutral and deflection values
- Adjust the linkage accordingly
Shaman Evo – mixers
Final Notes
The settings provided above are intended as a reliable baseline for initial setup.
They have been tested to ensure that the model perform well under normal flying conditions.
From this point on, each pilot is free to fine-tune the setup according to their own flying style and preferences.
Important
Always verify control directions and perform a range check before the first flight.